Power Tools * | Honda Power Equipment Hon-Hht25Sut4C 25 Cc U-Handle Trimmer Promotions

Features A Tap-And-Go Trimmer Head, Bike-Type Handle, Double Loop Harness And 4-Tooth Steel-Brush Cutting Blade Kit For More Serious Work.

Features:

• Bike-Style Handlebar With Fingertip Controls
• Includes Semi-Matic (Tap-And-Go) Trimmer Head And 4-Tooth Brush-Cutting Blade With Blade Guard And Mounting Hardward, As Well As Professional Double-Loop Harness And Protective Goggles
• Multi-Strand Drive Cable That Absorbs Vibration And Impacts
• 25 Cc Honda Gx25 Ohc Mini 4-Stroke Engine
• Electronic Ignition For Dependable Starts
• Low-Tone Muffler For Quieter Operation
• Bevel Gear Drive

Specifications:

• Engine Type: Honda Gx25, Mini 4-Stroke, Ohc, Single Cylinder Air-Cooled Multi-Position (360 )
• Honda Engine Model: Gx25
• Displacement: 25 Cc (1.53 Cid)
• Bore & Stroke: 35 X 26 Mm (1.4 X 1 In.)
• Maximum Net Torque: 1.0 N.M (0.74 Lbf-Ft.) @ 5,000 Rpm
• Idle Speed: 3,100 200 Rpm
• Max. No-Load Rpm* (Requires Blade Barrier): 10,000 Rpm
• Ignition System: Transistorized Flywheel Magneto (Electronic)
• Spark Plug: Cmr5H (Ngk)
• Cooling System: Forced Air
• Starting System: Recoil Starter
• Stopping System: Ignition Primary Circuit Ground
• Carburetor: Diaphragm Type W/Fuel Pump
• Recommended Fuel: Regular Unleaded Gasoline (87 Octane)
• Fuel Primer: Anti-Flood Type
• Fuel Capacity: 0.5 L (17.6 Fl. Imp. Oz.)
• Fuel Consumption (Approximate)**: 0.5 L/Hr (0.11 Imp. Gal./Hr)
• Clutch Drive Type: Centrifugal Twin Shoe-Clutch
• Clutch Size: 54 Mm (2.125 In.) Diameter
• Clutch Engagement: 4;200 200 Rpm
• Air Cleaner: Semi-Dry Type
• Lubrication System: Oil Mist
• Oil Capacity: 80 Cc (2.82 Fl. Imp. Oz.)
• Recommended Oil: Sae 10W30 Api Service Classification Sj Or Later

Dimensions:

• Overall Length With Cutter Mounted: 191.0 Cm (75.2 In.)
• Overall Width: (Handlebars) 60.5 Cm (23.8 In.)
• Overall Height: 41.5 Cm (16.3 In.)
• Dry Weight (Without Blade): 6.15 Kg (13.6 Lbs.)

Additional Information:

• Handle Type: U-Shaped (Bike Type Handle)
• Throttle Control Type: Two-Motion Trigger Type
• Engine Stop Switch: Slide Type Switch
• Cutting Head (Standard): Semi-Matic Line Feed Nylon (Tap-And-Go)
• Cutting Head (Optional): Manual, Pro-Tap, Semi-Pro
• Cutting Width: 43.2 Cm (17 In.)
• Line Type: Quiet Line
• Cutting Line Diameter: 2.41 Mm (0.095 In.)
• Anti-Vibration System: Standard
• Drive Shaft Type: Flexible Steel Cable
• Final Drive Gear Case: Helical Cut Bevel Gears / Sealed Ball Bearings
• Gear Ratio: 1.235 Input Shaft: 1 (Output Shaft)
• Main Pipe Diameter: 25.4 Mm (1 In.)
• Main Pipe Thickness / Material: 1.5 Mm (0.06 In.) / Aluminum
• Trimmer Guard With Cutter: Standard
• Steel Blade Guard: Standard
• Shoulder Harness: N/A
• Professional Double Loop Harness: Standard
• Safety Goggles (A.N.S.I Std.): Standard